Accessories

32145

From $899.00

Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.

32143

From $399.00

Mounts to the side of the vehicle for quick, easy shade whenever you need it. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32149

$399.00

A private space to shower or change at camp, in 300D polyester with a silver privacy lining. Weighted walls, storage pockets, towel hanger and a removable roof.

31130

$179.00

Extends your awning for extra cover — more shade, a little more privacy, and the breeze kept at bay.

32147

$1,249.00

Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.

33111

$203.01

Zips onto either side of a full-size Batwing for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

33110

$203.01

Zips onto either side of a Batwing Compact to close the space in, with a door for access. Run up to four to fully enclose the awning.

33109

$193.00

Zips onto either side of a Batwing Compact for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

32618

$499.00

Walls for the left-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32617

$499.00

Walls for the right-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32616

$299.00

Adds walls to your Batwing 180° Freestanding Awning for more shelter and privacy. Rugged 300D polyester that stands up to wind, rain and sun.

32615

$85.00

Straps to any horizontal pole with velcro and keeps the essentials within reach. Multiple large pockets in tough, lightweight 600D polyester.

32140

$499.00

Side-mounted shade in seconds, with STOW iT included. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32139

$449.00

Side-mounted shade in seconds, with STOW iT included. 4m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32125

$399.00

Built for low-roof vehicles where a standard awning leaves no head clearance. Mounts to either side or straight off the rear.

31133

$189.00

A zip-on wall for the Batwing Compact, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.

31132

$199.00

A zip-on wall for the full-size Batwing, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.

31131

$159.01

Zips onto a Sunseeker 2.5m or Batwing awning to push your shade out another 2m. Peg it to the ground or open it up on the included telescopic poles.

32131

$121.00

Adds 2m x 2m of cover to your Dome 1300 Awning. Fits in place and pegs to the ground at an angle for extra shade and privacy.

31115

$203.01

Polyethylene mesh floor cut to mirror the shape of your Batwing Awning. Bush or beach, it keeps the ground where it belongs.

61032

$87.00

Extra thickness under you and extra airflow beneath, for the Rhino-Rack 2 person tents. The convoluted shape keeps air moving all night.

61031

$140.00

Sits under the mattress in a Rhino-Rack 2 person tent with 3D air-circulation mesh that cuts heat and moisture build-up. Adds a little extra cushioning too.

61030

$375.00

Self-inflating mattress for the Rhino-Rack 2 person soft and hard shell tents. Open the valves and it does the rest, then compresses so your bedding can stay put.

61026

$2,199.00

A softshell tent for one or two, built on functionality and simplicity — innovative mounting system, LED light and storage pockets.

61052

$4,300.00

A slim, lightweight hardshell with accessory channels that turn the top into a usable platform. Mesh windows for airflow, built-in lighting, and fast setup and pack-down.

61002

$3,700.00

A hardshell tent for one or two, with an innovative mounting system, thick heavy duty mattress, LED light and storage in and on top of the shell.

RWHL

$203.01

Gets your luggage box, tray or kayak off the floor and onto the wall, up to 80kg. Steel tubes, a tie-down strap included, and it mounts to brick, plasterboard or wood.

RMFT530A

From $1,099.00

Our 4WD off-road proven roof box, carrying a huge 75kg. Built for road trips and for the tracks past the end of them.

RLBS

From $305.00

The most tie-down points we could fit, with raised side rails that make rounded cargo easy to secure. Quick to install and remove, in three sizes.

RMCB01

From $458.00

Black powder-coated steel with a sleek aerodynamic deflector up front — quieter travel, and bugs, dirt and grime kept off your cargo.

RLN2

$60.01

Latches over your cargo in a Rhino-Rack Steel Mesh Basket and holds it there all day. Ultra-light, ultra-strong, and it compacts away.

LB200

From $305.00

Carries bulky, lightweight gear on the roof in tear resistant 500D poly canvas. Weatherproof, so what you pack arrives dry.

61028

From $319.00

Heavy duty storage box for the roof or tub, for wet gear and tools that aren't travelling inside. Includes a diced foam insert to mould around sensitive equipment.

RBCA033

$40.00

Converts the RBC050 Hybrid Bike Carrier for fat bikes with wider wheel supports and extension straps. Simple to fit, so you can get further faster.

RBCA010

$81.00

A fork mounted bike carrier for ute trays, trailers and vans — or fix it to a wall at home for extra storage.

RBC053

$560.00

Carries up to four bikes on a 2 inch hitch receiver, with a pull latch to fold down for liftgate access. Collapsible arms make it easy to store.

RBC050

$458.00

Upright locking fork mount that carries your bike with the front wheel on. Universal hardware fits most crossbars — secure the fork, tighten the straps, drive.

RBC035

$299.00

Fork mount carrier that secures your bike to the roof, with a universal kit that fits all crossbars.

RBC025

$305.00

Puts your rear spare wheel to work carrying two bikes. Minimal fitting, quick to load and quicker to unload at the other end.

RBC008

$509.00

Carries up to four bikes off the towball, with a fold-down arm that gives you rear access when the bikes are off.

61018

$219.95

Mounts a thru axle bike straight to your Pioneer platform via the front axle and rear wheel brace. Built to cut the sway and rocking of the drive.

RWP01

$65.00

380mm foam pads that wrap around your Vortex bars for extra protection when loading and unloading a kayak, canoe or surfboard.

RTL002

$611.00

Hitch-mounted so one person can load a kayak, SUP or ladder onto the roof. Rest one end on the crossbar and push — the T-Loader rotates up with the load.

RTLK

$79.00

Pairs with an RTL003 or RTL004 T-Load Upright Kit so one person can get a kayak or other large load onto the roof.

570

$254.00

Side-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For SUPs, kayaks, longboards and anything long.

RWP03

$86.00

550mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

S520

$274.00

Stacks kayaks vertically so up to four fit on one roof — one car to the put-in, another at the take-out, and everyone shuttles together.

RWP05

$139.00

850mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

RWP04

$101.00

700mm foam pads that fit around most roof rack systems and protect both racks and cargo. Car park to water and back without the worry.

RBAS

$19.00

An anchor point for long loads when the vehicle gives you none. Sits inside the bonnet or boot with the soft webbing hanging out ready to tie off.

RAS

$19.00

Attaches under the bonnet to give you a feed-through point for tie down straps or rope. Extra stability for a long kayak, canoe or load.

RUSL

$229.00

Turns loading a SUP, longboard or kayak into a one person job. Lift one end onto the loader, then pivot the other up onto the crossbars.

RMPHU

$101.00

Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.

S510

$254.00

Carries your kayak or canoe on its side to save roof space, leaving room for a second craft alongside it on longer crossbars.

S512

$336.00

Carries your kayak or canoe on its side and folds flat when empty. Add an S512X extension and you can run up to four craft on long enough crossbars.

RBAS2

$46.00

A tie down with an anchor strap shaped to wrap the nose or tail of a stand up paddleboard. Quick to fit where there's no tie-off point.

RBAS1

$46.00

A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.

RLH2

$101.00

Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.

RLH1

$70.00

Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Heavy Duty Bars.

581

$264.00

Channel-mounted rear loading for your kayak, built locally by engineers who paddle. The next generation of the Nautic design.

580

$264.00

Channel-mounted side loading for your SUP, built locally by engineers who paddle. The next generation of the Nautic design.

571

$254.00

Rear-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For kayaks, SUPs, longboards and anything long.

43150

$142.00

Fit between the planks of a Pioneer tray or platform to protect both your gear and the system. Sold as a pair with two 3.5m straps for kayaks, boards and more.

572

From $234.00

Keeps your snow gear on the roof and your interior dry. Fits two sets of skis, snaps shut and locks, with a release that works in gloves.

RSIT2

$135.00

The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.

OSIT

$40.00

Puts a roller anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

MSIT

$299.00

Carries up to four recovery traction boards with a key lock, mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars.

LSIT

$305.00

The big brother to the regular Utility Holder — a high lift jack, two shovels, multiple fishing rods or a spade and axe together.

SSIT2

$69.00

Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.

ISIT

$60.01

Puts a light bar anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

BSIT

$70.00

Mounts a Batwing Awning to your vehicle via the STOW iT base bracket — slide it in, and take the awning off to store it when it's not needed.

USIT

$29.00

Works with the STOW iT base bracket to mount a Sunseeker awning, a Utility Holder or other Rhino-Rack accessories to the side of your system.

61019

$159.01

Fastens your spare wheel outside the vehicle for any camping or overland trip. Eye bolts included.

43159

$142.00

Mounts a Rhino-Rack Fishing Rod Holder (Small) at 75 degrees to any Pioneer system, freeing up the top of the platform for everything else.

RSWS

$91.00

Fastens your spare wheel securely to a Pioneer Tray or Platform. Simple to attach and detach, and it holds through the rough stuff.

RJBSW

$69.00

Puts a spare wheel on your Heavy Duty roof racks and the cabin space back where you need it on a long trip.

43151

$223.00

Carries two jerry cans upright on a Pioneer Tray, Tradie or Platform, so you can take enough fuel or water to reach the far end of the map. Ratchet tie downs and locking cables included.

43157

$223.00

A 3-in-1 kit that puts a shovel and a high lifting jack on one side of your Pioneer Platform, Tradie or Tray. Shovel, jack and combination brackets included.

SJHB

$99.00

Mounts your high lift jack straight to Vortex crossbars, out of the cabin and out of harm's way. Takes padlocks for secure transport.

43107

$162.00

Stands your jerry can upright on an Alloy Tray, Pioneer Tray, Tradie or Platform to save roof space — and the room inside for people.

43108

$162.00

Lays your jerry can flat on an Alloy Tray, Pioneer Tray, Tradie or Platform — the most secure fitment and the least roof space used.

43101

$132.00

Side-mounts and locks a high lift jack to a Pioneer Tray, Tradie or Platform. Strong, corrosion resistant powder coated steel that fits every Pioneer size.

RSWH

$132.00

Carries your spare on the roof instead of in the back, for the Pioneer range and Alloy Trays. Room inside for more passengers.

43203

$26.00

Mounts your Rotopax to the Pioneer range. Pair it with the RX-PM, RX-DLX-PM or RX-LOX-PM mount that matches your pack.

RGBH4

$172.00

A strap for most 4.0L gas bottles on the market. The stainless steel ring sits over the outlet and the covered cam buckle ratchets down tight.

53100

$66.00

Carries shovels, conduit and other long items on a Pioneer Platform, Tradie or Tray. Stainless steel with a black powder coat for work and weather.

61005

From $158.00

Carries a jerry can on your Pioneer system — enough fuel or water for the most remote destination, without eating your roof space.

61007

$169.00

Secures most 4.0L gas bottles to your system, with quick and easy installation.

43219

$132.00

Top-mounts a high lift jack to any Pioneer system in strong, corrosion resistant powder coated steel. Fits Pioneer systems of every size.

43235

From $101.00

Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.

43124

$69.00

A compact 1065mm spade that stores quickly and gets under a bogged vehicle. Heat treated Hi-Carbon steel, zinc plated and powder-coated.

43199

$122.00

Strap down recovery tracks of any brand on the #43159 bracket. 25mm polyester webbing and a stainless steel ratchet buckle, rated to 225kg.

43123

$89.00

A square mouth shovel for all weather, corrosion resistant and powder coated black. Non-slip contoured grip over a multicore fibreglass handle.

43173

$129.00

Fits LED lights to the Pioneer range. On a Platform or Tradie you can mount front, back or either side.

S613

$30.00

Attaches a standard aerial to your Vortex bar in zinc plated mild steel. Flat steel washers keep the hardware tight on corrugated roads.

43196

$149.00

180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. Fits roof racks, Pioneer systems via C-channel, and most popular bull bars — perpendicular or parallel.

43156

$111.00

Secures LED lights across the whole Pioneer range of Trays, Tradies and Platforms. Powder coated steel that resists corrosion and hard weather.

43202

$111.00

Fits small work lights or spot lights to any Rhino-Rack Pioneer System.

RWLB

$50.00

Mounts lights and aerials to Vortex and Heavy Duty bars in oxidized mild steel, with spring washers so it stays fixed on corrugations. Sold individually.

RBP-CBM

$49.01

Mounts a beacon to the headboard of a ute, clear of the load area. Fits most standard beacon lights, and keeps you seen at work and off road.

RAMK

$29.00

Attaches a standard aerial to your Heavy Duty bar. Zinc plated mild steel with a spring proof washer so the hardware stays put on corrugated roads.

SBP

$40.00

Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.

RBP

$50.00

Adapts a standard beacon light to your Heavy Duty Bar and puts it in clear view. Easy to install, adjust and operate.

43174

$121.00

Mounts LED lights up to 7.5kg to Vortex and Heavy Duty crossbars, top or bottom. Powder coated stainless steel, and it fits Whispbar HD and Rola HD bars too.

43234

$50.00

Fits work lights or spotlights to any Pioneer System, on any side and at varying heights. Corrosion resistant powder coated steel.

RABK

$39.00

Attaches a standard aerial and other gear to your Heavy Duty bar. Zinc plated mild steel with a shake proof washer that keeps bolts tight on corrugations.

LR1020

$101.00

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 1020mm wide.

SUB0835

$50.00

Secures ladder rails to Vortex bars. Twelve tabs with all nuts and bolts — enough for three VA crossbars.

SR615

$125.00

615mm of roller to make loading a ladder or timber easy, with brackets for a Vortex bar. Alloy with a plastic cover sleeve, rated to 42kg.

SR470

$109.00

470mm of roller to make loading a ladder or timber easy, with brackets for a Vortex bar. Alloy with a plastic cover sleeve, rated to 42kg.

RR680

$119.00

Rolls a ladder onto your Heavy Duty racks with very little effort — 680mm wide, and a cost effective step up from a full ladder system.

RR1800

$189.00

Rolls a ladder onto your Heavy Duty racks with very little effort — 1800mm wide, and a cost effective step up from a full ladder system.

RR1650

$179.00

Rolls a ladder onto your Heavy Duty racks with very little effort — 1650mm wide, and a cost effective step up from a full ladder system.

RR1500

$172.00

Rolls a ladder onto your Heavy Duty racks with very little effort — 1500mm wide, and a cost effective step up from a full ladder system.

RSLP

$25.00

Stops your ladder sliding and gives you a tie-off point at the same time. 75mm high with an eye bolt head, sold as a pair for Heavy Duty bars.

RLTAB

$14.95

Secures ladder rails to a Heavy Duty bar. Sold individually with the nuts and bolts needed to fit it.

REGLK

$299.00

A safe, secure and economical way to carry a ladder on Rhino-Rack Heavy Duty roof racks.

RLLP

$40.00

Stops your ladder sliding and gives you a tie-off point at the same time. 210mm high with an eye bolt head, sold as a pair for Heavy Duty bars.

43217

$111.00

Channel-mounts to the side of your Pioneer platform to anchor the Aluminium Folding Ladder (RAFL).

S602

$50.00

Holds your load in position so it can't slide in transit and damage everything else on the racks. For Vortex bars.

RLTAB-8

$61.00

Secures ladder rails to Heavy Duty bars. Eight tabs with all nuts and bolts — enough for two HD crossbars.

SLS5

$91.00

A 500mm camloc strap that ties your ladder down in seconds — no more hunting for cable or tape. Stainless and zinc plated steel throughout.

RLH

$50.00

Holds your load in position so it can't slide in transit and damage everything else on the racks.

LR880

$101.00

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 880mm wide.

T7-SLRS

$1,293.01

Slides your ladders on and off instead of lifting them — easier on your back and on the rear of the vehicle. An all-in-one loader with the carrying accessories included.

SUB0755

$41.00

Secures ladder rails to Vortex bars. Eight tabs with all nuts and bolts — enough for two VA crossbars.

RLTAB-12

$84.00

Secures ladder rails to Heavy Duty bars. Twelve tabs with all nuts and bolts — enough for three HD crossbars.

RLS5

$101.00

A cam loc snap shackle on a 500mm strap that fastens your ladder to Heavy Duty roof racks.

RLLR

$111.00

Mounts to the lengthwise rails of a ladder rack. 650mm of plastic-sheathed intertwined steel cord, keyed individually or in pairs, two keys included.

RLLB

$111.00

A 70cm locking cable for your Heavy Duty bar, in plastic-sheathed intertwined steel cord. Two keys included, in case one goes walkabout.

RAFL

$366.00

Bolts to the edge of your Pioneer system on any side of the vehicle and unfolds at an angle that keeps it off your paintwork. Aluminium with a black finish.

P46-100

From $254.00

A 4.6m long, 100mm diameter carrier with ribbed end caps and built-in Masterkey compatible steel locks.

MS26M

From $662.00

A rail set for carrying an extension or step ladder, with polypropylene pads along the rails. Add a rear roller to guide the ladder up.

LR470

From $76.00

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. Three widths.

ILRRACK

From $203.01

Stores your ladder on the interior roof of your van — out of sight, out of the weather and secure, with the cargo space below freed up. Height-adjustable, Australian designed and built.

CSL26M

From $662.00

A rail set for carrying an extension or step ladder, with PVC protection along the aluminium rails. Add a rear roller to guide the ladder up.

PEB4

$79.00

Four eye bolts with the patented Zwifloc™ channel nut, so you can add a tie down point anywhere on a Pioneer platform, Reconn-Deck or Vortex bar without moving anything else.

S606

$40.00

Installs discreetly under your Vortex crossbar to give you a tie-off point without using up rack space — useful when the load is wide.

RTD35P

From $36.00

Heavy duty straps with a design registered Buckle Protector — injection moulded TPV rubber around the metal cam buckle so nothing gets dented, scratched or marked.

RTD35L

$109.00

3.5m straps with a lockable cover and PU coated wire running the full length, finished with a rubberised, corrosion resistant cam buckle.

RTD3

$30.00

3m of heavy duty 25mm polyester webbing that won't rip or fray, with a metal buckle and a 225kg lashing capacity.

RRG1

$50.00

Twin hooks on bright blue 3m straps, for the big stuff — ladders, timber, even a small boat.

RRG2

$69.00

Twin hooks on bright yellow straps, for the big stuff — ladders, timber, even a small boat.

43207

$76.00

A 1.8m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

43206

$70.00

A 1.2m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

43205

$56.00

A 0.6m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

S604

$40.00

Creates a tie off point on your Vortex bar for securing a load.

RRG

$70.00

A 2m ratchet grab that pulls your load down tight to the roof racks and keeps it there.

61022

$99.00

A loop-design anchor point with Zwifloc, for securing gear wherever you need it. Traveller, tradesman or weekender.

REB

$36.00

Two galvanised steel eye bolts that mount straight to Heavy Duty bars for a corrosion resistant tie-off point. One of our most widely used fittings.

RRGL

$79.00

A long ratchet grab that pulls your load down tight to the roof racks and keeps it there.

43261

$76.00

Four low profile tie down points for when height matters. Traveller, tradesman or weekender — the load stays where you put it.

61023

$59.00

A 0.6m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

SRG

$70.00

A 2m ratchet grab for Vortex bars that pulls your load down tight and keeps it there.

61024

$69.00

A 1.2m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

61003

$99.00

A large, sturdy handle for loading and unloading, and a strong anchor point once the gear is on. Two per kit with Zwifloc.

RTDH3

A 3m strap that works with Rhino-Rack Eye Bolt Kits, with hooks that catch fixtures up to 25mm or mesh wire.

43245

$101.00

A large, sturdy handle for loading and unloading your Pioneer system, and a strong anchor point once the gear is on.

61021

$129.00

A mounting point on your Pioneer platform for every clamp-fixed accessory — bike carriers, kayak carriers, luggage boxes and more.

61012

$299.00

Mount to the sides of a Pioneer platform for load security and a different look. Large size.

61011

$299.00

Mount to the sides of a Pioneer platform for load security and a different look. Medium size.

61010

$229.00

Mount to the sides of a Pioneer platform for load security and a different look. Small size.

43138B

$208.00

Fits the C-Channel on 5 plank Pioneer Trays, Platforms and Tradies to give you a horizontal mounting point for bike carriers, kayak carriers, MasterFit boxes and more.

61020

$220.00

A secure, adaptable anchor for big bulky items on a Pioneer platform — an extra esky, a tool box. Fitted right, the corners wedge against the side of the load.

RF4

$159.01

1270mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF1

$159.01

813mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RWFS

$203.01

Attaches directly to the 5 series Pioneer underside extrusion. The small fairing, suiting 1236mm wide platforms.

RWFL

$203.01

Attaches directly to the 5 series Pioneer underside extrusion. The large fairing, suiting 1376mm, 1426mm and 1465mm wide platforms.

RF3

$159.01

1118mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF2

$159.01

965mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.