RMCB01
From $458.00
Black powder-coated steel with a sleek aerodynamic deflector up front — quieter travel, and bugs, dirt and grime kept off your cargo.
Shop By System
Tub Systems
Mounting the cross bars or platforms has never been easier
Legs & Fit Kits
Mounting the cross bars or platforms has never been easier
RMCB01
From $458.00
Black powder-coated steel with a sleek aerodynamic deflector up front — quieter travel, and bugs, dirt and grime kept off your cargo.
RWLB
$50.00
Mounts lights and aerials to Vortex and Heavy Duty bars in oxidized mild steel, with spring washers so it stays fixed on corrugations. Sold individually.
LB200
From $305.00
Carries bulky, lightweight gear on the roof in tear resistant 500D poly canvas. Weatherproof, so what you pack arrives dry.
SRG
$70.00
A 2m ratchet grab for Vortex bars that pulls your load down tight and keeps it there.
S602
$50.00
Holds your load in position so it can't slide in transit and damage everything else on the racks. For Vortex bars.
SLS5
$91.00
A 500mm camloc strap that ties your ladder down in seconds — no more hunting for cable or tape. Stainless and zinc plated steel throughout.
SJHB
$99.00
Mounts your high lift jack straight to Vortex crossbars, out of the cabin and out of harm's way. Takes padlocks for secure transport.
43107
$162.00
Stands your jerry can upright on an Alloy Tray, Pioneer Tray, Tradie or Platform to save roof space — and the room inside for people.
43174
$121.00
Mounts LED lights up to 7.5kg to Vortex and Heavy Duty crossbars, top or bottom. Powder coated stainless steel, and it fits Whispbar HD and Rola HD bars too.
RTDH3
A 3m strap that works with Rhino-Rack Eye Bolt Kits, with hooks that catch fixtures up to 25mm or mesh wire.
RBC053
$560.00
Carries up to four bikes on a 2 inch hitch receiver, with a pull latch to fold down for liftgate access. Collapsible arms make it easy to store.
RTLK
$79.00
Pairs with an RTL003 or RTL004 T-Load Upright Kit so one person can get a kayak or other large load onto the roof.
32143
From $399.00
Mounts to the side of the vehicle for quick, easy shade whenever you need it. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.
RSIT2
$135.00
The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.
LSIT
$305.00
The big brother to the regular Utility Holder — a high lift jack, two shovels, multiple fishing rods or a spade and axe together.
USIT
$29.00
Works with the STOW iT base bracket to mount a Sunseeker awning, a Utility Holder or other Rhino-Rack accessories to the side of your system.
OSIT
$40.00
Puts a roller anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.
MSIT
$299.00
Carries up to four recovery traction boards with a key lock, mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars.
SSIT2
$69.00
Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.
BSIT
$70.00
Mounts a Batwing Awning to your vehicle via the STOW iT base bracket — slide it in, and take the awning off to store it when it's not needed.
RLBS
From $305.00
The most tie-down points we could fit, with raised side rails that make rounded cargo easy to secure. Quick to install and remove, in three sizes.
RSWH
$132.00
Carries your spare on the roof instead of in the back, for the Pioneer range and Alloy Trays. Room inside for more passengers.
RBC025
$305.00
Puts your rear spare wheel to work carrying two bikes. Minimal fitting, quick to load and quicker to unload at the other end.
61026
$2,199.00
A softshell tent for one or two, built on functionality and simplicity — innovative mounting system, LED light and storage pockets.
Compatible accessories
Add-ons and accessories engineered to fit the range above. Add them now, or build out your setup one trip at a time.
REB
$36.00
Two galvanised steel eye bolts that mount straight to Heavy Duty bars for a corrosion resistant tie-off point. One of our most widely used fittings.
RBCA025
$40.00
The 2" Hitch Receiver allows you to secure your 2" receiver bike racks (RBC038) to your vehicle - greatly reducing the risk of theft.
31131
$159.01
Zips onto a Sunseeker 2.5m or Batwing awning to push your shade out another 2m. Peg it to the ground or open it up on the included telescopic poles.
31130
$179.00
Extends your awning for extra cover — more shade, a little more privacy, and the breeze kept at bay.
31129
$129.00
The Rhino-Rack Universal Freestanding Awning Brackets are built to deliver a strong, stable, and adaptable mounting solution for a variety of freestanding awnings.
43123
$89.00
A square mouth shovel for all weather, corrosion resistant and powder coated black. Non-slip contoured grip over a multicore fibreglass handle.
43124
$69.00
A compact 1065mm spade that stores quickly and gets under a bogged vehicle. Heat treated Hi-Carbon steel, zinc plated and powder-coated.
LR615
From $76.00
Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. Three widths.
LR880
$101.00
Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 880mm wide.
LR1020
$101.00
Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 1020mm wide.
RAFL
$366.00
Bolts to the edge of your Pioneer system on any side of the vehicle and unfolds at an angle that keeps it off your paintwork. Aluminium with a black finish.
RUBK
$50.00
The U Bolt Kit is recommended for use when mounting a Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Heavy Duty Bar.
S280
$50.00
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Vortex Bar.
S280L
$50.00
The U Bolt Kit is recommended for use when mounting a Rhino-Rack Mesh Basket, Mesh Platform or a Luggage Box/Ski Box to the Rhino-Rack Vortex Bar.
61030
$375.00
Self-inflating mattress for the Rhino-Rack 2 person soft and hard shell tents. Open the valves and it does the rest, then compresses so your bedding can stay put.
61031
$140.00
Sits under the mattress in a Rhino-Rack 2 person tent with 3D air-circulation mesh that cuts heat and moisture build-up. Adds a little extra cushioning too.
61032
$87.00
Extra thickness under you and extra airflow beneath, for the Rhino-Rack 2 person tents. The convoluted shape keeps air moving all night.
RTD35P
From $36.00
Heavy duty straps with a design registered Buckle Protector — injection moulded TPV rubber around the metal cam buckle so nothing gets dented, scratched or marked.
RLN1
$60.01
Latches over your cargo in a Rhino-Rack Steel Mesh Basket and holds it there all day. Ultra-light, ultra-strong, and it compacts away.
RMPHU
$101.00
Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.
43202
$111.00
Fits small work lights or spot lights to any Rhino-Rack Pioneer System.
43234
$50.00
Fits work lights or spotlights to any Pioneer System, on any side and at varying heights. Corrosion resistant powder coated steel.
RBP
$50.00
Adapts a standard beacon light to your Heavy Duty Bar and puts it in clear view. Easy to install, adjust and operate.
SBP
$40.00
Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.
S606
$40.00
Installs discreetly under your Vortex crossbar to give you a tie-off point without using up rack space — useful when the load is wide.
43217
$111.00
Channel-mounts to the side of your Pioneer platform to anchor the Aluminium Folding Ladder (RAFL).
RLH2
$101.00
Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.
S512
$336.00
Carries your kayak or canoe on its side and folds flat when empty. Add an S512X extension and you can run up to four craft on long enough crossbars.
RLH
$50.00
Holds your load in position so it can't slide in transit and damage everything else on the racks.
RLLB
$111.00
A 70cm locking cable for your Heavy Duty bar, in plastic-sheathed intertwined steel cord. Two keys included, in case one goes walkabout.
RLLP
$40.00
Stops your ladder sliding and gives you a tie-off point at the same time. 210mm high with an eye bolt head, sold as a pair for Heavy Duty bars.
RLRM
$119.00
The RLRM has been specifically designed to secure Ladder Loaders to multi-bar systems across ute cab and canopy.
RBAS1
$46.00
A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.
43199
$122.00
Strap down recovery tracks of any brand on the #43159 bracket. 25mm polyester webbing and a stainless steel ratchet buckle, rated to 225kg.
43101
$132.00
Side-mounts and locks a high lift jack to a Pioneer Tray, Tradie or Platform. Strong, corrosion resistant powder coated steel that fits every Pioneer size.
43235
From $101.00
Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.
RBC050
$458.00
Upright locking fork mount that carries your bike with the front wheel on. Universal hardware fits most crossbars — secure the fork, tighten the straps, drive.
570
$254.00
Side-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For SUPs, kayaks, longboards and anything long.
571
$254.00
Rear-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For kayaks, SUPs, longboards and anything long.
580
$264.00
Channel-mounted side loading for your SUP, built locally by engineers who paddle. The next generation of the Nautic design.
581
$264.00
Channel-mounted rear loading for your kayak, built locally by engineers who paddle. The next generation of the Nautic design.
RBAS2
$46.00
A tie down with an anchor strap shaped to wrap the nose or tail of a stand up paddleboard. Quick to fit where there's no tie-off point.
32149
$399.00
A private space to shower or change at camp, in 300D polyester with a silver privacy lining. Weighted walls, storage pockets, towel hanger and a removable roof.
61005
From $158.00
Carries a jerry can on your Pioneer system — enough fuel or water for the most remote destination, without eating your roof space.
61007
$169.00
Secures most 4.0L gas bottles to your system, with quick and easy installation.
ISIT
$60.01
Puts a light bar anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.
61003
$99.00
A large, sturdy handle for loading and unloading, and a strong anchor point once the gear is on. Two per kit with Zwifloc.
FIND A DEALER
FIND A DEALER
Rhino-Rack products can be purchased and installed through our vast network of authorised dealers throughout Australia. To locate your nearest dealer, enter your suburb or postcode into the dealer search form below.
Find my Dealer