Shop By System
Tub Systems
Mounting the cross bars or platforms has never been easier
Legs & Fit Kits
Mounting the cross bars or platforms has never been easier
Everything you can add to your existing rack from grab handles and STOW iT holders to Zwifloc lock tabs, carriers, straps, storage and recovery gear. Browse the full accessory range.
32147
$1,249.00
Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.
32145
From $899.00
Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.
RLH1
$70.00
Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Heavy Duty Bars.
RLH2
$101.00
Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.
RABK
$39.00
Attaches a standard aerial and other gear to your Heavy Duty bar. Zinc plated mild steel with a shake proof washer that keeps bolts tight on corrugations.
61030
$375.00
Self-inflating mattress for the Rhino-Rack 2 person soft and hard shell tents. Open the valves and it does the rest, then compresses so your bedding can stay put.
RAFL
$366.00
Bolts to the edge of your Pioneer system on any side of the vehicle and unfolds at an angle that keeps it off your paintwork. Aluminium with a black finish.
61031
$140.00
Sits under the mattress in a Rhino-Rack 2 person tent with 3D air-circulation mesh that cuts heat and moisture build-up. Adds a little extra cushioning too.
61028
From $319.00
Heavy duty storage box for the roof or tub, for wet gear and tools that aren't travelling inside. Includes a diced foam insert to mould around sensitive equipment.
P46-100
From $254.00
A 4.6m long, 100mm diameter carrier with ribbed end caps and built-in Masterkey compatible steel locks.
CSL26M
From $662.00
A rail set for carrying an extension or step ladder, with PVC protection along the aluminium rails. Add a rear roller to guide the ladder up.
RBCA033
$40.00
Converts the RBC050 Hybrid Bike Carrier for fat bikes with wider wheel supports and extension straps. Simple to fit, so you can get further faster.
61032
$87.00
Extra thickness under you and extra airflow beneath, for the Rhino-Rack 2 person tents. The convoluted shape keeps air moving all night.
61007
$169.00
Secures most 4.0L gas bottles to your system, with quick and easy installation.
61003
$99.00
A large, sturdy handle for loading and unloading, and a strong anchor point once the gear is on. Two per kit with Zwifloc.
61002
$3,700.00
A hardshell tent for one or two, with an innovative mounting system, thick heavy duty mattress, LED light and storage in and on top of the shell.
RBC050
$458.00
Upright locking fork mount that carries your bike with the front wheel on. Universal hardware fits most crossbars — secure the fork, tighten the straps, drive.
ILRRACK
From $203.01
Stores your ladder on the interior roof of your van — out of sight, out of the weather and secure, with the cargo space below freed up. Height-adjustable, Australian designed and built.
RBAS1
$46.00
A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.
RLLB
$111.00
A 70cm locking cable for your Heavy Duty bar, in plastic-sheathed intertwined steel cord. Two keys included, in case one goes walkabout.
RLTAB-12
$84.00
Secures ladder rails to Heavy Duty bars. Twelve tabs with all nuts and bolts — enough for three HD crossbars.
RLLR
$111.00
Mounts to the lengthwise rails of a ladder rack. 650mm of plastic-sheathed intertwined steel cord, keyed individually or in pairs, two keys included.
LR880
$101.00
Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 880mm wide.
LR470
From $76.00
Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. Three widths.
Compatible accessories
Add-ons and accessories engineered to fit the range above. Add them now, or build out your setup one trip at a time.
32616
$299.00
Adds walls to your Batwing 180° Freestanding Awning for more shelter and privacy. Rugged 300D polyester that stands up to wind, rain and sun.
31133
$189.00
A zip-on wall for the Batwing Compact, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.
31132
$199.00
A zip-on wall for the full-size Batwing, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.
32618
$499.00
Walls for the left-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.
32617
$499.00
Walls for the right-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.
31129
$129.00
The Rhino-Rack Universal Freestanding Awning Brackets are built to deliver a strong, stable, and adaptable mounting solution for a variety of freestanding awnings.
RUFLB
$203.01
Secure your Aluminium Folding Ladder to Rhino-Rack's Pioneer Roof Systems with the Aluminium Folding Ladder Bracket.
BC2
$60.01
The BC2 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.
BC3
$87.00
The BC3 Conduit Clamp Set will adapt a 100mm / 4" Conduit Carrier to a Rhino-Rack Heavy Duty Bar. It comes with 2 clamps and allows for mounting of the conduit above or below the bar.
SPC4
$50.00
Made from galvanized steel, these 100mm / 4" pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an M8 bolt and nyloc nut.
BCW
$60.01
Ideal for use as a replacement or spare, the BCW Conduit End Cap is perfectly suited for use with any of Rhino-Rack's 100mm / 4" width Conduit Carriers.
BC150
$81.00
Ideal for use as a replacement or spare, the BC150 End Cap is perfectly suited for use with any of Rhino-Rack's 150mm (6") width Conduit Carriers.
BEC150
$234.00
The Conduits End Caps & Sleeves are the ideal accessory to close off your conduit. Designed for easy use, the Conduit End Caps & Sleeves feature a ribbed end caps for added grip as well as a secure wire trace for easier operation and loss prevention.
SPC6
$56.00
Made from galvanized steel, these 150mm (6") pipe clamps are sold as a pair. They fit into the top channel of a Rhino-Rack Vortex Bar, and are secured in place with an m8 bolt and nyloc nut.
LSIT
$305.00
The big brother to the regular Utility Holder — a high lift jack, two shovels, multiple fishing rods or a spade and axe together.
MSIT
$299.00
Carries up to four recovery traction boards with a key lock, mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars.
43235
From $101.00
Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.
RSIT2
$135.00
The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.
PEB4
$79.00
Four eye bolts with the patented Zwifloc™ channel nut, so you can add a tie down point anywhere on a Pioneer platform, Reconn-Deck or Vortex bar without moving anything else.
61001
$139.00
The Cam Buckle Strap Pickup Kit includes all the items you need to strap down your gear to a Pioneer or Reconn-Deck with ease.
61023
$59.00
A 0.6m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.
570
$254.00
Side-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For SUPs, kayaks, longboards and anything long.
571
$254.00
Rear-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For kayaks, SUPs, longboards and anything long.
580
$264.00
Channel-mounted side loading for your SUP, built locally by engineers who paddle. The next generation of the Nautic design.
581
$264.00
Channel-mounted rear loading for your kayak, built locally by engineers who paddle. The next generation of the Nautic design.
RTD35P
From $36.00
Heavy duty straps with a design registered Buckle Protector — injection moulded TPV rubber around the metal cam buckle so nothing gets dented, scratched or marked.
RB1120B
From $111.00
The Rhino-Rack Heavy Duty bars can be purchased in black or silver and can be cut to 8 different predefined lengths to suit different vehicles including: 1120mm, 1250mm, 1375mm, 1500mm, 1650mm, 1800mm, 2000mm, 2400mm.
43123
$89.00
A square mouth shovel for all weather, corrosion resistant and powder coated black. Non-slip contoured grip over a multicore fibreglass handle.
SSIT2
$69.00
Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.
RLLP
$40.00
Stops your ladder sliding and gives you a tie-off point at the same time. 210mm high with an eye bolt head, sold as a pair for Heavy Duty bars.
SBP
$40.00
Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.
43234
$50.00
Fits work lights or spotlights to any Pioneer System, on any side and at varying heights. Corrosion resistant powder coated steel.
RWLB
$50.00
Mounts lights and aerials to Vortex and Heavy Duty bars in oxidized mild steel, with spring washers so it stays fixed on corrugations. Sold individually.
RBCA030
$91.00
The Rhino-Rack Multi Axle adaptor converts your existing Rhino-Rack fork mount bike carrier to work with new and emerging thru-axle standards used within the cycling industry.
RBCA036
$30.00
The Boost adapter Thru Axle Insert allows 15mm x 110mm thru-axle bikes (Boost sizing) to fit the Multi-Axle adaptor and attach to existing bike carriers.
RBAS2
$46.00
A tie down with an anchor strap shaped to wrap the nose or tail of a stand up paddleboard. Quick to fit where there's no tie-off point.
RMPHU
$101.00
Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.
RUSL
$229.00
Turns loading a SUP, longboard or kayak into a one person job. Lift one end onto the loader, then pivot the other up onto the crossbars.
S606
$40.00
Installs discreetly under your Vortex crossbar to give you a tie-off point without using up rack space — useful when the load is wide.
FIND A DEALER
FIND A DEALER
Rhino-Rack products can be purchased and installed through our vast network of authorised dealers throughout Australia. To locate your nearest dealer, enter your suburb or postcode into the dealer search form below.
Find my Dealer
