-
Dealership only -
Sold out 1200mm Reconn-Deck BarRDB120P
$160.00
The Rhino-Rack Reconn-Deck Bar is a strong and durable crossbar. It has integrated channels on all four sides, allowing for mounting of accessories.
-
150mm Conduit Clamps (x2)
BC2-150
$81.00
This kit consists of 2 clamps to allow a 150mm / 6" Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.
-
150mm Conduit Clamps (x3)
BC3-150
$101.00
This kit consists of 3 clamps to allow a 150mm / 6" Conduit Carrier to be fitted to a Rhino-Rack Heavy Duty Bar.
-
180 Awning Wall Kit
32616
$299.00
Adds walls to your Batwing 180° Freestanding Awning for more shelter and privacy. Rugged 300D polyester that stands up to wind, rain and sun.
-
180° Batwing Awning
32147
$1,249.00
Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.
-
2 inch Hitch Receiver Locking Pin
RBCA025
$40.00
The 2" Hitch Receiver allows you to secure your 2" receiver bike racks (RBC038) to your vehicle - greatly reducing the risk of theft.
-
2500 Ditch Mount Bracket
RDM01
$98.00
The 2500 Ditch Mount Bracket provides a permanent or fixed mounting point for the roof rack to attach to.
-
2500 Leg
RLKHDH
From $102.00
The RLKHD is the 2500 Leg Kit for the Heavy Duty Bar. Sold as 4 legs for 2 bar systems.
-
2500 Leg Spacer (10mm)
RLKS1
$15.00
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
-
Sold out 2500 Leg Spacer (18mm)RLKS2
$26.00
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
-
2500 Leg Spacer (26mm)
RLKS3
$40.00
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
-
Sold out 2500 Leg Spacer (34mm)RLKS4
$50.00
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
-
2500 Leg Spacer (42mm)
RLKS5
$56.00
Used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system.
-
Dealership only 2500 Leg Spacer (Hyundai i30 GD Hatch)SUB0663
$10.00
This spacer/washer is designed specifically for use with the Hyundai i30 GD Hatch (3 or 5 door).
-
Dealership only 2500 Lock KitRLK-LOCK-4
$31.00
The RLK-LOCK-4 Kit is a locking kit designed for your Rhino-Rack 2500 Multi Fit Roof Racks. These locks can be inserted into the leg of your roof rack system to secure your rack to your vehicle and prevent theft. The kit comes with 4 locks and 4 keys.
-
2500 Retaining Clip (x4)
ARD01
$19.00
The 2500 Torque Retaining Clip is designed to wrap around the clamp and securing the bolt in place while fitting a 2500 Roof Rack System.
-
270/180/AUTO Full Arm Assembly Replacement
32160
$119.00
The Rhino-Rack 270/180/AUTO Full Arm Assembly Replacement is a genuine spare part designed to restore full functionality to your Batwing Freestanding Awning.
-
270° Batwing Awning
32145
From $899.00
Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.
-
Dealership only 4 Bike Carrier (Towball Mount)RBC008
$509.00
Carries up to four bikes off the towball, with a fold-down arm that gives you rear access when the bikes are off.
-
5/16 x 3/4 Flat Washer (Stainless Steel) (10 Pack)
W030-BP
$10.00
This high quality component is useful both as a spare part or replacement.
-
6NM TORQUE TOOL HARDWARE KIT
SP394
$59.00
The Torque Tool Hardware Kit provides reliable screw tightening for various Rhino-Rack accessories.
-
Sold out Adjustable Canoe Holder (Heavy Duty Bar)RLH1
$70.00
Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Heavy Duty Bars.
-
Adjustable Canoe Holder (Vortex Bar)
RLH2
$101.00
Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.
Compatible accessories
Complete your setup
Add-ons and accessories engineered to fit the range above. Add them now, or build out your setup one trip at a time.
- Reconn Platform (Frame only) (Toyota 250 / Lexus GX)
63102
$1,234.00
Unlock the potential of your adventures with the low profile Reconn Platform: Where simplicity meets boundless exploration.
- Batwing Compact Wall Extension
31133
$189.00
A zip-on wall for the Batwing Compact, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.
- Batwing Wall Extension
31132
$199.00
A zip-on wall for the full-size Batwing, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.
- Side Wall Kit Freestanding Batwing 270 LH
32618
$499.00
Walls for the left-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.
- Side Wall Kit Freestanding Batwing 270 RH
32617
$499.00
Walls for the right-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.
- Universal Freestanding Awning Bracket Pair
31129
$129.00
The Rhino-Rack Universal Freestanding Awning Brackets are built to deliver a strong, stable, and adaptable mounting solution for a variety of freestanding awnings.
- STOW iT Utility Holder - Regular
RSIT2
$135.00
The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.
- Rhino-Rack Shovel
43123
$89.00
A square mouth shovel for all weather, corrosion resistant and powder coated black. Non-slip contoured grip over a multicore fibreglass handle.
- Recovery Track Mounting Bracket
43235
From $101.00
Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.
- STOW iT Base Bracket (2 Pack)
SSIT2
$69.00
Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.
- Ski & Snowboard Carrier
572
From $234.00
Keeps your snow gear on the roof and your interior dry. Fits two sets of skis, snaps shut and locks, with a release that works in gloves.
- Nautic 580 SUP Carrier — Side Loading (Channel Mount)
580
$264.00
Channel-mounted side loading for your SUP, built locally by engineers who paddle. The next generation of the Nautic design.
- RCL Locking Leg
RCL6
$223.00
The low profile RCL Locking Legs are designed with a key locking system to reduce wind resistance and increase security.
- X Tray
RMCB01
From $458.00
Black powder-coated steel with a sleek aerodynamic deflector up front — quieter travel, and bugs, dirt and grime kept off your cargo.
- Multi Purpose Holder (Universal Fit)
RMPHU
$101.00
Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.
- Rapid Straps
RTD35P
From $36.00
Heavy duty straps with a design registered Buckle Protector — injection moulded TPV rubber around the metal cam buckle so nothing gets dented, scratched or marked.
- Load Holder
RLH
$50.00
Holds your load in position so it can't slide in transit and damage everything else on the racks.
- Folding J Style Kayak Carrier
S512
$336.00
Carries your kayak or canoe on its side and folds flat when empty. Add an S512X extension and you can run up to four craft on long enough crossbars.
- Kayak / Ski Bow Strap Bonnet Tie Down
RBAS1
$46.00
A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.
- Eye Bolt Kit
REB
$36.00
Two galvanised steel eye bolts that mount straight to Heavy Duty bars for a corrosion resistant tie-off point. One of our most widely used fittings.
- Ladder Cable Lock (70cm / 27.6inch)
RLLB
$111.00
A 70cm locking cable for your Heavy Duty bar, in plastic-sheathed intertwined steel cord. Two keys included, in case one goes walkabout.
- Large Ladder Peg
RLLP
$40.00
Stops your ladder sliding and gives you a tie-off point at the same time. 210mm high with an eye bolt head, sold as a pair for Heavy Duty bars.
- Vortex Load Holder
S602
$50.00
Holds your load in position so it can't slide in transit and damage everything else on the racks. For Vortex bars.
- Vortex Beacon Mounting Plate
SBP
$40.00
Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.
FIND A DEALER
FIND A DEALER
Rhino-Rack products can be purchased and installed through our vast network of authorised dealers throughout Australia. To locate your nearest dealer, enter your suburb or postcode into the dealer search form below.
Find my Dealer


























