Accessories

32149

€256,95

A private space to shower or change at camp, in 300D polyester with a silver privacy lining. Weighted walls, storage pockets, towel hanger and a removable roof.

33111

€130,95

Zips onto either side of a full-size Batwing for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

33110

€130,95

Zips onto either side of a Batwing Compact to close the space in, with a door for access. Run up to four to fully enclose the awning.

33300

€609,95

270° of shade and 6.4m² of coverage in a left-hand mount, sized for small to medium vehicles and short-wheelbase 4WDs.

33109

€124,95

Zips onto either side of a Batwing Compact for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

32618

€320,95

Walls for the left-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32617

€320,95

Walls for the right-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32616

€192,95

Adds walls to your Batwing 180° Freestanding Awning for more shelter and privacy. Rugged 300D polyester that stands up to wind, rain and sun.

32615

€54,95

Straps to any horizontal pole with velcro and keeps the essentials within reach. Multiple large pockets in tough, lightweight 600D polyester.

32140

€320,95

Side-mounted shade in seconds, with STOW iT included. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32139

€288,95

Side-mounted shade in seconds, with STOW iT included. 4m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32125

€256,95

Built for low-roof vehicles where a standard awning leaves no head clearance. Mounts to either side or straight off the rear.

31130

€115,95

Extends your awning for extra cover — more shade, a little more privacy, and the breeze kept at bay.

31133

€121,95

A zip-on wall for the Batwing Compact, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.

31132

€127,95

A zip-on wall for the full-size Batwing, adding shade, privacy and shelter to either side. Combine up to four to close the awning in completely.

31131

€102,95

Zips onto a Sunseeker 2.5m or Batwing awning to push your shade out another 2m. Peg it to the ground or open it up on the included telescopic poles.

32131

€77,95

Adds 2m x 2m of cover to your Dome 1300 Awning. Fits in place and pegs to the ground at an angle for extra shade and privacy.

31115

€130,95

Polyethylene mesh floor cut to mirror the shape of your Batwing Awning. Bush or beach, it keeps the ground where it belongs.

33200

€642,95

Right-hand mount Batwing with 270° of shade and 11m² of coverage. Water and mould resistant fabric rated UPF 50+, and it takes every existing Batwing wall and extension.

32143

From €256,95

Mounts to the side of the vehicle for quick, easy shade whenever you need it. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32145

From €577,95

Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.

61032

€55,95

Extra thickness under you and extra airflow beneath, for the Rhino-Rack 2 person tents. The convoluted shape keeps air moving all night.

61031

€90,95

Sits under the mattress in a Rhino-Rack 2 person tent with 3D air-circulation mesh that cuts heat and moisture build-up. Adds a little extra cushioning too.

61030

€241,95

Self-inflating mattress for the Rhino-Rack 2 person soft and hard shell tents. Open the valves and it does the rest, then compresses so your bedding can stay put.

61026

€1.413,95

A softshell tent for one or two, built on functionality and simplicity — innovative mounting system, LED light and storage pockets.

61052

€2.763,95

A slim, lightweight hardshell with accessory channels that turn the top into a usable platform. Mesh windows for airflow, built-in lighting, and fast setup and pack-down.

61002

€2.377,95

A hardshell tent for one or two, with an innovative mounting system, thick heavy duty mattress, LED light and storage in and on top of the shell.

RMFT370A

From €706,95

Our 4WD off-road proven roof box, carrying a huge 75kg. Built for road trips and for the tracks past the end of them.

RMFZ66

400L in a highly aerodynamic, modern shell. Secure and reliable for the family holiday or the road trip with mates.

RMFT440

440L of off-road proven storage in black, carrying 75kg — around 25kg more than other brand roof boxes.

RWHL

€130,95

Gets your luggage box, tray or kayak off the floor and onto the wall, up to 80kg. Steel tubes, a tie-down strap included, and it mounts to brick, plasterboard or wood.

RLBS

From €196,95

The most tie-down points we could fit, with raised side rails that make rounded cargo easy to secure. Quick to install and remove, in three sizes.

RMCB01

From €294,95

Black powder-coated steel with a sleek aerodynamic deflector up front — quieter travel, and bugs, dirt and grime kept off your cargo.

RLN1

€38,95

Latches over your cargo in a Rhino-Rack Steel Mesh Basket and holds it there all day. Ultra-light, ultra-strong, and it compacts away.

LB200

From €196,95

Carries bulky, lightweight gear on the roof in tear resistant 500D poly canvas. Weatherproof, so what you pack arrives dry.

61028

From €205,95

Heavy duty storage box for the roof or tub, for wet gear and tools that aren't travelling inside. Includes a diced foam insert to mould around sensitive equipment.

RBCA033

€25,95

Converts the RBC050 Hybrid Bike Carrier for fat bikes with wider wheel supports and extension straps. Simple to fit, so you can get further faster.

RBCA010

€52,95

A fork mounted bike carrier for ute trays, trailers and vans — or fix it to a wall at home for extra storage.

RBC053

€359,95

Carries up to four bikes on a 2 inch hitch receiver, with a pull latch to fold down for liftgate access. Collapsible arms make it easy to store.

RBC050

€294,95

Upright locking fork mount that carries your bike with the front wheel on. Universal hardware fits most crossbars — secure the fork, tighten the straps, drive.

RBC035

€192,95

Fork mount carrier that secures your bike to the roof, with a universal kit that fits all crossbars.

RBC025

€196,95

Puts your rear spare wheel to work carrying two bikes. Minimal fitting, quick to load and quicker to unload at the other end.

RBC008

€327,95

Carries up to four bikes off the towball, with a fold-down arm that gives you rear access when the bikes are off.

61018

€141,95

Mounts a thru axle bike straight to your Pioneer platform via the front axle and rear wheel brace. Built to cut the sway and rocking of the drive.

570

€163,95

Side-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For SUPs, kayaks, longboards and anything long.

RWP03

€55,95

550mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

S520

€176,95

Stacks kayaks vertically so up to four fit on one roof — one car to the put-in, another at the take-out, and everyone shuttles together.

RWP05

€89,95

850mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

RWP04

€64,95

700mm foam pads that fit around most roof rack systems and protect both racks and cargo. Car park to water and back without the worry.

RWP01

€41,95

380mm foam pads that wrap around your Vortex bars for extra protection when loading and unloading a kayak, canoe or surfboard.

RTL002

€392,95

Hitch-mounted so one person can load a kayak, SUP or ladder onto the roof. Rest one end on the crossbar and push — the T-Loader rotates up with the load.

RBAS

€12,95

An anchor point for long loads when the vehicle gives you none. Sits inside the bonnet or boot with the soft webbing hanging out ready to tie off.

RAS

€12,95

Attaches under the bonnet to give you a feed-through point for tie down straps or rope. Extra stability for a long kayak, canoe or load.

RUSL

€147,95

Turns loading a SUP, longboard or kayak into a one person job. Lift one end onto the loader, then pivot the other up onto the crossbars.

RMPHU

€64,95

Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.

S510

€163,95

Carries your kayak or canoe on its side to save roof space, leaving room for a second craft alongside it on longer crossbars.

S512

€215,95

Carries your kayak or canoe on its side and folds flat when empty. Add an S512X extension and you can run up to four craft on long enough crossbars.

RBAS2

€29,95

A tie down with an anchor strap shaped to wrap the nose or tail of a stand up paddleboard. Quick to fit where there's no tie-off point.

RBAS1

€29,95

A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.

RLH2

€64,95

Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.

RLH1

€45,95

Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Heavy Duty Bars.

RTLK

€50,95

Pairs with an RTL003 or RTL004 T-Load Upright Kit so one person can get a kayak or other large load onto the roof.

581

€169,95

Channel-mounted rear loading for your kayak, built locally by engineers who paddle. The next generation of the Nautic design.

580

€169,95

Channel-mounted side loading for your SUP, built locally by engineers who paddle. The next generation of the Nautic design.

571

€163,95

Rear-loading cradles that clamp straight onto your crossbars, so they fit every current roof rack system. For kayaks, SUPs, longboards and anything long.

43150

€91,95

Fit between the planks of a Pioneer tray or platform to protect both your gear and the system. Sold as a pair with two 3.5m straps for kayaks, boards and more.

572

From €150,95

Keeps your snow gear on the roof and your interior dry. Fits two sets of skis, snaps shut and locks, with a release that works in gloves.

OSIT

€25,95

Puts a roller anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

MSIT

€192,95

Carries up to four recovery traction boards with a key lock, mounted horizontally or vertically on a Pioneer Platform, Reconn-Deck or Vortex Bars.

RSIT2

€86,95

The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.

LSIT

€196,95

The big brother to the regular Utility Holder — a high lift jack, two shovels, multiple fishing rods or a spade and axe together.

SSIT2

€44,95

Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.

ISIT

€38,95

Puts a light bar anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

BSIT

€45,95

Mounts a Batwing Awning to your vehicle via the STOW iT base bracket — slide it in, and take the awning off to store it when it's not needed.

USIT

€18,95

Works with the STOW iT base bracket to mount a Sunseeker awning, a Utility Holder or other Rhino-Rack accessories to the side of your system.

43159

€91,95

Mounts a Rhino-Rack Fishing Rod Holder (Small) at 75 degrees to any Pioneer system, freeing up the top of the platform for everything else.

RSWS

€58,95

Fastens your spare wheel securely to a Pioneer Tray or Platform. Simple to attach and detach, and it holds through the rough stuff.

RJBSW

€44,95

Puts a spare wheel on your Heavy Duty roof racks and the cabin space back where you need it on a long trip.

43151

€143,95

Carries two jerry cans upright on a Pioneer Tray, Tradie or Platform, so you can take enough fuel or water to reach the far end of the map. Ratchet tie downs and locking cables included.

43157

€143,95

A 3-in-1 kit that puts a shovel and a high lifting jack on one side of your Pioneer Platform, Tradie or Tray. Shovel, jack and combination brackets included.

SJHB

€63,95

Mounts your high lift jack straight to Vortex crossbars, out of the cabin and out of harm's way. Takes padlocks for secure transport.

43107

€104,95

Stands your jerry can upright on an Alloy Tray, Pioneer Tray, Tradie or Platform to save roof space — and the room inside for people.

61019

€102,95

Fastens your spare wheel outside the vehicle for any camping or overland trip. Eye bolts included.

43108

€104,95

Lays your jerry can flat on an Alloy Tray, Pioneer Tray, Tradie or Platform — the most secure fitment and the least roof space used.

43101

€84,95

Side-mounts and locks a high lift jack to a Pioneer Tray, Tradie or Platform. Strong, corrosion resistant powder coated steel that fits every Pioneer size.

RSWH

€84,95

Carries your spare on the roof instead of in the back, for the Pioneer range and Alloy Trays. Room inside for more passengers.

43203

€16,95

Mounts your Rotopax to the Pioneer range. Pair it with the RX-PM, RX-DLX-PM or RX-LOX-PM mount that matches your pack.

RGBH4

€110,95

A strap for most 4.0L gas bottles on the market. The stainless steel ring sits over the outlet and the covered cam buckle ratchets down tight.

53100

€42,95

Carries shovels, conduit and other long items on a Pioneer Platform, Tradie or Tray. Stainless steel with a black powder coat for work and weather.

61005

From €101,95

Carries a jerry can on your Pioneer system — enough fuel or water for the most remote destination, without eating your roof space.

61007

€108,95

Secures most 4.0L gas bottles to your system, with quick and easy installation.

43219

€84,95

Top-mounts a high lift jack to any Pioneer system in strong, corrosion resistant powder coated steel. Fits Pioneer systems of every size.

43124

€44,95

A compact 1065mm spade that stores quickly and gets under a bogged vehicle. Heat treated Hi-Carbon steel, zinc plated and powder-coated.

43197

From €64,95

Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.

43199

€78,95

Strap down recovery tracks of any brand on the #43159 bracket. 25mm polyester webbing and a stainless steel ratchet buckle, rated to 225kg.

43123

€57,95

A square mouth shovel for all weather, corrosion resistant and powder coated black. Non-slip contoured grip over a multicore fibreglass handle.

S613

€19,95

Attaches a standard aerial to your Vortex bar in zinc plated mild steel. Flat steel washers keep the hardware tight on corrugated roads.

43196

€95,95

180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. Fits roof racks, Pioneer systems via C-channel, and most popular bull bars — perpendicular or parallel.

43173

€82,95

Fits LED lights to the Pioneer range. On a Platform or Tradie you can mount front, back or either side.

43156

€71,95

Secures LED lights across the whole Pioneer range of Trays, Tradies and Platforms. Powder coated steel that resists corrosion and hard weather.

43202

€71,95

Fits small work lights or spot lights to any Rhino-Rack Pioneer System.

RWLB

€32,95

Mounts lights and aerials to Vortex and Heavy Duty bars in oxidized mild steel, with spring washers so it stays fixed on corrugations. Sold individually.

RBP-CBM

€31,95

Mounts a beacon to the headboard of a ute, clear of the load area. Fits most standard beacon lights, and keeps you seen at work and off road.

RAMK

€18,95

Attaches a standard aerial to your Heavy Duty bar. Zinc plated mild steel with a spring proof washer so the hardware stays put on corrugated roads.

SBP

€25,95

Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.

RBP

€32,95

Adapts a standard beacon light to your Heavy Duty Bar and puts it in clear view. Easy to install, adjust and operate.

43174

€77,95

Mounts LED lights up to 7.5kg to Vortex and Heavy Duty crossbars, top or bottom. Powder coated stainless steel, and it fits Whispbar HD and Rola HD bars too.

43234

€32,95

Fits work lights or spotlights to any Pioneer System, on any side and at varying heights. Corrosion resistant powder coated steel.

RABK

€25,95

Attaches a standard aerial and other gear to your Heavy Duty bar. Zinc plated mild steel with a shake proof washer that keeps bolts tight on corrugations.

LR1020

€64,95

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 1020mm wide.

SUB0835

€32,95

Secures ladder rails to Vortex bars. Twelve tabs with all nuts and bolts — enough for three VA crossbars.

SR615

€80,95

615mm of roller to make loading a ladder or timber easy, with brackets for a Vortex bar. Alloy with a plastic cover sleeve, rated to 42kg.

SR470

€70,95

470mm of roller to make loading a ladder or timber easy, with brackets for a Vortex bar. Alloy with a plastic cover sleeve, rated to 42kg.

RR680

€76,95

Rolls a ladder onto your Heavy Duty racks with very little effort — 680mm wide, and a cost effective step up from a full ladder system.

RR1800

€121,95

Rolls a ladder onto your Heavy Duty racks with very little effort — 1800mm wide, and a cost effective step up from a full ladder system.

RR1650

€115,95

Rolls a ladder onto your Heavy Duty racks with very little effort — 1650mm wide, and a cost effective step up from a full ladder system.

RR1500

€110,95

Rolls a ladder onto your Heavy Duty racks with very little effort — 1500mm wide, and a cost effective step up from a full ladder system.

RSLP

€16,95

Stops your ladder sliding and gives you a tie-off point at the same time. 75mm high with an eye bolt head, sold as a pair for Heavy Duty bars.

RLTAB

€9,95

Secures ladder rails to a Heavy Duty bar. Sold individually with the nuts and bolts needed to fit it.

REGLK

€192,95

A safe, secure and economical way to carry a ladder on Rhino-Rack Heavy Duty roof racks.

RLLP

€25,95

Stops your ladder sliding and gives you a tie-off point at the same time. 210mm high with an eye bolt head, sold as a pair for Heavy Duty bars.

43217

€71,95

Channel-mounts to the side of your Pioneer platform to anchor the Aluminium Folding Ladder (RAFL).

S602

€32,95

Holds your load in position so it can't slide in transit and damage everything else on the racks. For Vortex bars.

RLTAB-8

€39,95

Secures ladder rails to Heavy Duty bars. Eight tabs with all nuts and bolts — enough for two HD crossbars.

SLS5

€58,95

A 500mm camloc strap that ties your ladder down in seconds — no more hunting for cable or tape. Stainless and zinc plated steel throughout.

RLH

€32,95

Holds your load in position so it can't slide in transit and damage everything else on the racks.

LR880

€64,95

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 880mm wide.

T7-SLRS

€831,95

Slides your ladders on and off instead of lifting them — easier on your back and on the rear of the vehicle. An all-in-one loader with the carrying accessories included.

SUB0755

€26,95

Secures ladder rails to Vortex bars. Eight tabs with all nuts and bolts — enough for two VA crossbars.

RLTAB-12

€54,95

Secures ladder rails to Heavy Duty bars. Twelve tabs with all nuts and bolts — enough for three HD crossbars.

RLS5

€64,95

A cam loc snap shackle on a 500mm strap that fastens your ladder to Heavy Duty roof racks.

RLLR

€71,95

Mounts to the lengthwise rails of a ladder rack. 650mm of plastic-sheathed intertwined steel cord, keyed individually or in pairs, two keys included.

RLLB

€71,95

A 70cm locking cable for your Heavy Duty bar, in plastic-sheathed intertwined steel cord. Two keys included, in case one goes walkabout.

RAFL

€235,95

Bolts to the edge of your Pioneer system on any side of the vehicle and unfolds at an angle that keeps it off your paintwork. Aluminium with a black finish.

P46-100

From €163,95

A 4.6m long, 100mm diameter carrier with ribbed end caps and built-in Masterkey compatible steel locks.

MS26M

From €425,95

A rail set for carrying an extension or step ladder, with polypropylene pads along the rails. Add a rear roller to guide the ladder up.

LR470

From €48,95

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. Three widths.

ILRRACK

From €130,95

Stores your ladder on the interior roof of your van — out of sight, out of the weather and secure, with the cargo space below freed up. Height-adjustable, Australian designed and built.

CSL26M

From €425,95

A rail set for carrying an extension or step ladder, with PVC protection along the aluminium rails. Add a rear roller to guide the ladder up.

PEB4

€50,95

Four eye bolts with the patented Zwifloc™ channel nut, so you can add a tie down point anywhere on a Pioneer platform, Reconn-Deck or Vortex bar without moving anything else.

RTD35P

From €23,95

Heavy duty straps with a design registered Buckle Protector — injection moulded TPV rubber around the metal cam buckle so nothing gets dented, scratched or marked.

RTD35L

€70,95

3.5m straps with a lockable cover and PU coated wire running the full length, finished with a rubberised, corrosion resistant cam buckle.

RTD3

€19,95

3m of heavy duty 25mm polyester webbing that won't rip or fray, with a metal buckle and a 225kg lashing capacity.

RRG1

€32,95

Twin hooks on bright blue 3m straps, for the big stuff — ladders, timber, even a small boat.

RRG2

€44,95

Twin hooks on bright yellow straps, for the big stuff — ladders, timber, even a small boat.

43207

€48,95

A 1.8m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

43206

€45,95

A 1.2m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

43205

€36,95

A 0.6m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

S604

€25,95

Creates a tie off point on your Vortex bar for securing a load.

RRG

€45,95

A 2m ratchet grab that pulls your load down tight to the roof racks and keeps it there.

S606

€25,95

Installs discreetly under your Vortex crossbar to give you a tie-off point without using up rack space — useful when the load is wide.

61022

€63,95

A loop-design anchor point with Zwifloc, for securing gear wherever you need it. Traveller, tradesman or weekender.

REB

€23,95

Two galvanised steel eye bolts that mount straight to Heavy Duty bars for a corrosion resistant tie-off point. One of our most widely used fittings.

RRGL

€50,95

A long ratchet grab that pulls your load down tight to the roof racks and keeps it there.

43261

€48,95

Four low profile tie down points for when height matters. Traveller, tradesman or weekender — the load stays where you put it.

61023

€37,95

A 0.6m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

SRG

€45,95

A 2m ratchet grab for Vortex bars that pulls your load down tight and keeps it there.

61024

€44,95

A 1.2m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

61003

€63,95

A large, sturdy handle for loading and unloading, and a strong anchor point once the gear is on. Two per kit with Zwifloc.

RTDH3

A 3m strap that works with Rhino-Rack Eye Bolt Kits, with hooks that catch fixtures up to 25mm or mesh wire.

43245

€64,95

A large, sturdy handle for loading and unloading your Pioneer system, and a strong anchor point once the gear is on.

61021

€82,95

A mounting point on your Pioneer platform for every clamp-fixed accessory — bike carriers, kayak carriers, luggage boxes and more.

61012

€192,95

Mount to the sides of a Pioneer platform for load security and a different look. Large size.

61011

€192,95

Mount to the sides of a Pioneer platform for load security and a different look. Medium size.

61010

€147,95

Mount to the sides of a Pioneer platform for load security and a different look. Small size.

43138B

€133,95

Fits the C-Channel on 5 plank Pioneer Trays, Platforms and Tradies to give you a horizontal mounting point for bike carriers, kayak carriers, MasterFit boxes and more.

61020

€141,95

A secure, adaptable anchor for big bulky items on a Pioneer platform — an extra esky, a tool box. Fitted right, the corners wedge against the side of the load.

RF1

€102,95

813mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RWFS

€130,95

Attaches directly to the 5 series Pioneer underside extrusion. The small fairing, suiting 1236mm wide platforms.

RWFL

€130,95

Attaches directly to the 5 series Pioneer underside extrusion. The large fairing, suiting 1376mm, 1426mm and 1465mm wide platforms.

RF4

€102,95

1270mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF3

€102,95

1118mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF2

€102,95

965mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.