Accessories

32149

$625.00

A private space to shower or change at camp, in 300D polyester with a silver privacy lining. Weighted walls, storage pockets, towel hanger and a removable roof.

33111

$327.00

Zips onto either side of a full-size Batwing for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

33110

$249.00

Zips onto either side of a Batwing Compact to close the space in, with a door for access. Run up to four to fully enclose the awning.

33300

$894.00

270° of shade and 6.4m² of coverage in a left-hand mount, sized for small to medium vehicles and short-wheelbase 4WDs.

33109

$220.00

Zips onto either side of a Batwing Compact for extra shade, privacy and shelter. Run up to four to fully enclose the awning.

32618

$852.00

Walls for the left-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32617

$852.00

Walls for the right-hand Batwing 270° Freestanding Awning in rugged 300D polyester. More coverage and privacy, and a barrier against wind, rain and sun.

32616

$426.00

Adds walls to your Batwing 180° Freestanding Awning for more shelter and privacy. Rugged 300D polyester that stands up to wind, rain and sun.

32615

$107.00

Straps to any horizontal pole with velcro and keeps the essentials within reach. Multiple large pockets in tough, lightweight 600D polyester.

32140

$568.00

Side-mounted shade in seconds, with STOW iT included. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32139

$532.00

Side-mounted shade in seconds, with STOW iT included. 4m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32125

$540.00

Built for low-roof vehicles where a standard awning leaves no head clearance. Mounts to either side or straight off the rear.

33200

$213.00

Right-hand mount Batwing with 270° of shade and 11m² of coverage. Water and mould resistant fabric rated UPF 50+, and it takes every existing Batwing wall and extension.

32148

$1,093.00

Mounts to the side of the vehicle for quick, easy shade whenever you need it. 5m² of CPAI-84 compliant, mould resistant ripstop rated UPF 50+.

32145

From $1,419.00

Wraps from the side of the vehicle around the rear, 6m² compact up to 12m² freestanding. One person rolls it out — no ropes, nothing to trip over — and side walls close it into a room.

61002

$4,682.00

A hardshell tent for one or two, with an innovative mounting system, thick heavy duty mattress, LED light and storage in and on top of the shell.

RMFT530A

$1,064.00

Our 4WD off-road proven roof box, carrying a huge 75kg. Built for road trips and for the tracks past the end of them.

RMFZ66

$1,206.00

400L in a highly aerodynamic, modern shell. Secure and reliable for the family holiday or the road trip with mates.

RMFT440

$710.00

440L of off-road proven storage in black, carrying 75kg — around 25kg more than other brand roof boxes.

RWHL

$185.00

Gets your luggage box, tray or kayak off the floor and onto the wall, up to 80kg. Steel tubes, a tie-down strap included, and it mounts to brick, plasterboard or wood.

RLN1

$93.00

Latches over your cargo in a Rhino-Rack Steel Mesh Basket and holds it there all day. Ultra-light, ultra-strong, and it compacts away.

61028

$426.00

Heavy duty storage box for the roof or tub, for wet gear and tools that aren't travelling inside. Includes a diced foam insert to mould around sensitive equipment.

RBCA033

$64.00

Converts the RBC050 Hybrid Bike Carrier for fat bikes with wider wheel supports and extension straps. Simple to fit, so you can get further faster.

RBC025

$355.00

Puts your rear spare wheel to work carrying two bikes. Minimal fitting, quick to load and quicker to unload at the other end.

RWP03

$107.00

550mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

S520

$270.00

Stacks kayaks vertically so up to four fit on one roof — one car to the put-in, another at the take-out, and everyone shuttles together.

RWP05

$142.00

850mm foam pads that protect your roof racks while you load and unload surfboards, canoes, kayaks and paddleboards.

RWP04

$128.00

700mm foam pads that fit around most roof rack systems and protect both racks and cargo. Car park to water and back without the worry.

RWP01

$78.00

380mm foam pads that wrap around your Vortex bars for extra protection when loading and unloading a kayak, canoe or surfboard.

RTL002

$610.00

Hitch-mounted so one person can load a kayak, SUP or ladder onto the roof. Rest one end on the crossbar and push — the T-Loader rotates up with the load.

RBAS

$36.00

An anchor point for long loads when the vehicle gives you none. Sits inside the bonnet or boot with the soft webbing hanging out ready to tie off.

RAS

$29.00

Attaches under the bonnet to give you a feed-through point for tie down straps or rope. Extra stability for a long kayak, canoe or load.

RMPHU

$114.00

Clamps around almost any roof bars, lengthways or sideways, to carry fishing rods, ski poles and other long gear. Glass-reinforced nylon with santoprene rubber padding.

S510

$71.00

Carries your kayak or canoe on its side to save roof space, leaving room for a second craft alongside it on longer crossbars.

RBAS2

$78.00

A tie down with an anchor strap shaped to wrap the nose or tail of a stand up paddleboard. Quick to fit where there's no tie-off point.

RBAS1

$71.00

A 3.6m tie down with an anchor strap that wraps around and protects a kayak with no bow or stern tie-off point. Quick to fit, front or rear.

RLH2

$86.00

Holds your canoe in position so it can't slide in transit and damage the rest of your load. Built to fit Rhino-Rack Vortex Bars.

RTLK

$114.00

Pairs with an RTL003 or RTL004 T-Load Upright Kit so one person can get a kayak or other large load onto the roof.

43150

$185.00

Fit between the planks of a Pioneer tray or platform to protect both your gear and the system. Sold as a pair with two 3.5m straps for kayaks, boards and more.

572

From $249.00

Keeps your snow gear on the roof and your interior dry. Fits two sets of skis, snaps shut and locks, with a release that works in gloves.

OSIT

$43.00

Puts a roller anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

RSIT2

$213.00

The secure way to carry shovels, spades, paddles, axes, fishing rods and anything else too long for inside the vehicle.

LSIT

$497.00

The big brother to the regular Utility Holder — a high lift jack, two shovels, multiple fishing rods or a spade and axe together.

SSIT2

$142.00

Fixes to the perimeter channel of a Pioneer platform or a Rhino-Rack crossbar, then lets you add, remove and swap accessories at will. Adaptors sold separately.

ISIT

$67.00

Puts a light bar anywhere on the perimeter of your Pioneer platform or crossbars. Slides into the STOW iT base bracket wherever it's mounted.

BSIT

$93.00

Mounts a Batwing Awning to your vehicle via the STOW iT base bracket — slide it in, and take the awning off to store it when it's not needed.

USIT

$57.00

Works with the STOW iT base bracket to mount a Sunseeker awning, a Utility Holder or other Rhino-Rack accessories to the side of your system.

43159

$185.00

Mounts a Rhino-Rack Fishing Rod Holder (Small) at 75 degrees to any Pioneer system, freeing up the top of the platform for everything else.

43151

$497.00

Carries two jerry cans upright on a Pioneer Tray, Tradie or Platform, so you can take enough fuel or water to reach the far end of the map. Ratchet tie downs and locking cables included.

61019

$213.00

Fastens your spare wheel outside the vehicle for any camping or overland trip. Eye bolts included.

43101

$171.00

Side-mounts and locks a high lift jack to a Pioneer Tray, Tradie or Platform. Strong, corrosion resistant powder coated steel that fits every Pioneer size.

43203

$43.00

Mounts your Rotopax to the Pioneer range. Pair it with the RX-PM, RX-DLX-PM or RX-LOX-PM mount that matches your pack.

53100

$142.00

Carries shovels, conduit and other long items on a Pioneer Platform, Tradie or Tray. Stainless steel with a black powder coat for work and weather.

61005

From $426.00

Carries a jerry can on your Pioneer system — enough fuel or water for the most remote destination, without eating your roof space.

61007

$327.00

Secures most 4.0L gas bottles to your system, with quick and easy installation.

43219

$142.00

Top-mounts a high lift jack to any Pioneer system in strong, corrosion resistant powder coated steel. Fits Pioneer systems of every size.

43235

From $142.00

Backs up the Pioneer Recovery Track Side Bracket (#43159) so you can carry two more recovery tracks. Never be bogged with too little gear to get out.

S613

$29.00

Attaches a standard aerial to your Vortex bar in zinc plated mild steel. Flat steel washers keep the hardware tight on corrugated roads.

43196

$171.00

180 degrees of rotation for aerials, antennas, flags, small LEDs and spotlights. Fits roof racks, Pioneer systems via C-channel, and most popular bull bars — perpendicular or parallel.

43173

$128.00

Fits LED lights to the Pioneer range. On a Platform or Tradie you can mount front, back or either side.

43156

$128.00

Secures LED lights across the whole Pioneer range of Trays, Tradies and Platforms. Powder coated steel that resists corrosion and hard weather.

43202

$171.00

Fits small work lights or spot lights to any Rhino-Rack Pioneer System.

RWLB

$57.00

Mounts lights and aerials to Vortex and Heavy Duty bars in oxidized mild steel, with spring washers so it stays fixed on corrugations. Sold individually.

SBP

$71.00

Adapts a standard beacon light to your Vortex bar, for the night tradesman who needs to be seen. Galvanised steel with spring washers included.

43174

$128.00

Mounts LED lights up to 7.5kg to Vortex and Heavy Duty crossbars, top or bottom. Powder coated stainless steel, and it fits Whispbar HD and Rola HD bars too.

43234

$64.00

Fits work lights or spotlights to any Pioneer System, on any side and at varying heights. Corrosion resistant powder coated steel.

LR1020

$128.00

Makes light work of getting long or heavy objects onto a Pioneer platform, Reconn-Deck or Rhino-Rack crossbars. 1020mm wide.

RR1500

$284.00

Rolls a ladder onto your Heavy Duty racks with very little effort — 1500mm wide, and a cost effective step up from a full ladder system.

43217

$71.00

Channel-mounts to the side of your Pioneer platform to anchor the Aluminium Folding Ladder (RAFL).

S602

$50.00

Holds your load in position so it can't slide in transit and damage everything else on the racks. For Vortex bars.

RLH

$57.00

Holds your load in position so it can't slide in transit and damage everything else on the racks.

RAFL

$497.00

Bolts to the edge of your Pioneer system on any side of the vehicle and unfolds at an angle that keeps it off your paintwork. Aluminium with a black finish.

PEB4

$93.00

Four eye bolts with the patented Zwifloc™ channel nut, so you can add a tie down point anywhere on a Pioneer platform, Reconn-Deck or Vortex bar without moving anything else.

RTD3

$50.00

3m of heavy duty 25mm polyester webbing that won't rip or fray, with a metal buckle and a 225kg lashing capacity.

43207

$114.00

A 1.8m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

43205

$78.00

A 0.6m cable lockdown that sits in the C channel of your Vortex crossbars or Pioneer product. Suits a wide range of crossbar brands, fits with the supplied Allen key.

S606

$64.00

Installs discreetly under your Vortex crossbar to give you a tie-off point without using up rack space — useful when the load is wide.

61022

$157.00

A loop-design anchor point with Zwifloc, for securing gear wherever you need it. Traveller, tradesman or weekender.

REB

$50.00

Two galvanised steel eye bolts that mount straight to Heavy Duty bars for a corrosion resistant tie-off point. One of our most widely used fittings.

61023

$100.00

A 0.6m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

61024

$114.00

A 1.2m steel core strap and lock for whatever you leave up there — ladder, kayak, awning or gas bottle.

61003

$142.00

A large, sturdy handle for loading and unloading, and a strong anchor point once the gear is on. Two per kit with Zwifloc.

61021

$227.00

A mounting point on your Pioneer platform for every clamp-fixed accessory — bike carriers, kayak carriers, luggage boxes and more.

61020

$284.00

A secure, adaptable anchor for big bulky items on a Pioneer platform — an extra esky, a tool box. Fitted right, the corners wedge against the side of the load.

RF1

$199.00

813mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RWFS

$86.00

Attaches directly to the 5 series Pioneer underside extrusion. The small fairing, suiting 1236mm wide platforms.

RWFL

$391.00

Attaches directly to the 5 series Pioneer underside extrusion. The large fairing, suiting 1376mm, 1426mm and 1465mm wide platforms.

RF4

$199.00

1270mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF3

$199.00

1118mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.

RF2

$199.00

965mm of quiet. Deflects air around your load to kill the whistle, and sharpens the look of the vehicle while it's at it.